Pro directional microphone

ULTRA-DIRECTIONAL ACOUSTIC DESIGN
Get your audience into the story.

Immerse your audience at the core of your story by reducing all other disturbing sounds coming from the sides and back of your camera. This is possible thanks to the mic’s revolutionary acoustic design that creates an ultra-directional super-cardioid recording pattern.

INFINITELY VARIABLE GAIN CONTROL
No more low-level or distorted audios.

The infinitely variable gain control is a knob located at the rear of the microphone that allows you to precisely tailor the audio level delivered to your recording device. This feature will help you obtain extremely clean and professional audio under any shooting conditions.

• Adjust the dial from 1 to 15 to set the perfect output level and avoid those typical low-volume or distorted audios found on amateur videos.

• Check the LED: A green, orange or red light will help you detect distortion peaks while adjusting the correct gain.

• The gain control works only when using the analog 3.5 mm output connector.

ONBOARD DIGITAL FILTERS
Take full control of your recordings using studio-grade features.

Activate the hi-pass filters to remove any low-frequency rumbles or hums produced by traffic, air-conditionings or electronic devices and boost subtle high-frequencies with the touch of a button.

• External Radio Interference protection thanks to its extreme shielding design.

• Activate the 75 Hz hi-pass filter to remove all ultra-low frequencies below this threshold

• Activate the 150 Hz hi-pass filter to remove a wider range of low frequencies

• High-frequency booster to enrich your audio with extremely crisp sound details
  

AUDIO TEST
Check the audio quality for yourself.

Plug in your headphones and compare for yourself the difference between using the Rode Videomic NTG and recording directly through the smartphone’s internal microphone.

-20dB PAD
Record even under extremely loud environments.

Most microphones get completely saturated above a certain acoustic level and are useless in loud environments like workshops, concerts or parades. To solve this problem, the VideoMic NTG includes a -20dB PAD that reduces the recording level so you can still get high-quality audio under extremely loud conditions.

INTERNAL RECHARGEABLE BATTERY
More than 30 hours of autonomy.

The VideoMic NTG Includes an internal 350 mAh rechargeable lithium battery for feeding its advanced electronics. Thanks to its smart power management, you can enjoy up to 30 hours of operation after a full charge.

• Internal 350 mAh rechargeable lithium battery

• More than 30 hours of operation after a full charge.

• 2h charging time from empty to full through its USB-C charging port

• Auto power feature that turns on/off your mic depending if your camera/Smartphone is on or off.

• Battery indicator LED: Green / Amber / Red / Blinking Red

• Can be charged on the go using any standard USB output or power-bank.

OPEN-CELL FOAM WINDSCREEN
Improve your sound and protect your mic.

The Rode Videomic NTG includes a high quality protective foam windscreen that will help you obtain better results out of the box:

• Protect your audio from "pops" of air when speaking close to the mic.

• Reduce wind noise when shooting outdoors.

• Reduce ambient noise from the surrounding environment.

• Protect the microphone itself from scratches, dirt and dust.

RYCOTE LYRE SHOCK-MOUNT AND SLIDING RAIL
The best mount for the best mic.

The slightest vibrations in your setup could potentially be transmitted to your mic and ruin your audio. The high-quality Rycote® Lyre® shock mounting holds the mic in a “floating” way that absorbs all vibrations transmitted to the structure. For a more convenient setup, it also includes a rubber pad for cable management, a sliding rail to adjust the mic’s placement once mounted, a cold shoe lock and a 3/8” threaded shoe.

INCLUDED CABLES
Say goodbye to dongles and adapters.

While the VideoMic NTG can be connected to your smartphone using its analog 3.5 mm output plus an adapter, you can fully access its advanced digital features by connecting it directly to your device through its USB-C port using the included smartphone cables:

• iPhone Lightning - Use the included SC15 cable [USB-C to Lightning] for connecting the Videomic NTG directly to your iPhone.

• USB-C Devices - Use the included SC16 cable [USB-C to USB-C] for connecting the Videomic NTG directly to your Android phone, tablet or laptop.

MONITORING
Listen your audio while recording.

Once the mic is digitally plugged to your smartphone through the SC15 or SC16 USB-C cables, the 3.5 mm connector can now be used for plugging your headphones and monitor your audio. Audio monitoring means that you can listen through your headphones the audio that is being recorded in your smartphone. This is important because it gives you real-time confirmation that the recording levels are correct. You can use the gain control at the back of the mic as your headphone's volume.

INTEGRATED USB CONNECTIVITY
Plug it to your computer and unlock its full potential.

The VideoMic NTG is a class-compliant USB device that can be plugged directly to your computer or laptop using the inlcuded SCB-C to USB-A cable. Use this set up for accessing the following funcions:

• Access firmware updates and advanced microphone settings using the RODE Central App (Available for Mac Or Windows PCs).

• Use it as your computer’s mic for recording voice-overs, podcasts or for live-conferencing.

• Charge the internal battery.

DESIGNED AND MADE IN AUSTRALIA
Durable, lightweight and compact.

Dimensions and weight:

• Length: 171 mm / Width: 70 mm / Height: 75 mm

• Mic Diameter: 21,6 mm

• Weight: 94g.

In the Box:

• Videomic NTG microphone

• Rycote shockmount

• Open-cell foam windscreen

• 3.5 mm to 3.5 mm TRS/TRRS cable

• USB-C to USB-A cable

RODE VIDEOMICRO NTG

Our premium option for professionals who seek excellence